Ex-Demo 40 Ton Multidrive Conveyor Ejector Body
The Multidrive Conveyor Ejector is an innovative non-tip. Bulk load discharge solution, for semi-trailers, trailers and rigid vehicles. It can discharge a broad range of materials. The discharge rate is quicker than other systems and can be finely controlled by the operator. This gives the operator a choice of heaping or spreading the load.
To see the trailer in action please check out the video gallery:
This body was originally mounted on the M8 Demonstration vehicle (as seen in the videos). The truck from this video was sold to Rwanda as a Timber Hauler, so the body was removed. This body is now surplus to requirement.
The Ex Demo body will come fully reconditioned and ready for trailer mounting. We can deliver globally.
Please Call for Enquiries or Email Us at:
Multidrive ex-MOD Training Vehicle For Sale
This Foden 4380 8x6 Multidrive Tanker truck 20000 Lt. was used by Multidrive to train MoD drivers and has a low mileage of 18,625.
Designed to operate on all roads, from motorways to heavily damaged roads and cross-country, the vehicle has superb traction and maneuverability.
The 4x2 front drive tractor unit is coupled via the Multidrive system to the rear steer bogie, creating the 8x6 configuration.
The aluminum tank has 4 compartments, totaling 20,000 litre capacity. The vehicle is equipped with flow meters and PTO pumping equipment.
- Engine: Cummins 6 cylinder water cooled turbo diesel L325 325hp
- Steering RHD – PAS
- Tyres XDR 295/80R Michelin
- Max-Load 20,000 litres capacity
- Electrical System 24 volt
- Length 13.0m
- Height 3.5m
- Width 2.5m
- G.V.W. 35,000kg
Some potential uses
- Fuel truck for off and on road application
- All terrain Fire bowser
- Dust suppression truck for quarry operation
To download a copy of a specification sheet, right click the image and choose “Save image as” from the popup menu.
Cummins ISB 5.9 Litre 275 Engine with Allison MD3560(P) transmission For Sale
This engine was removed from an ex-demo, prototype vehicles. This engine is currently fitted with an Allison MD3560(P) transmission. We can remove this and sell seperately if required. The turbo charge requires reconditioning or replacement. Also, a new ECU is required.
This engine was removed from a vehicles some years ago. When the engine was removed, it was in full working order. However, it has not been started for many years and we are unsure if it still runs.
Tyres for sale
2 x New and 1 x Worn 17.5R25 xha All fitted to wheels with 104mm Offset
7 x 650/65 R25 (all in various conditions) fitted to 25-19.5/2.5 Wheel Rim with 15 mm Offset.
To keep up to date with our latest developments, sign up for our newsletter below.
If you are interested in any of the items on this page, please contact us using the form below.